Jiang's blog: "amse"

s with the service openings or ports on the adsorber bed. It provides the means of loading bulk granular adsorbent into the adsorber bed. The method of loading shall ensure that the bed is uniformly filled. (o) seismic requirements (p) adsorbent sampling requirements (quantity and frequency) (q) spent adsorbent handling requirements (r) fire protection requirements FE-4121 Adsorbent Removal Equipment FE-4220 SIZING The aol.com adsorbent service equipment also provides the means for removing spent adsorbent from the Type III adsorber. The service equipment shall include the necessary separating/filter capacity to control safety and Each adsorber unit shall be sized to provide the specified total volumetric fiow and meet the performance requirements as specified in FE-4210(i) and (j) or (k).

health hazards arising from handling of the adsorbent. The spent adsorbent shall be containerized as specified FE-4300 ADSORBENT BED DETAILS for disposal. (a) Each bed section shall consist of perforated sheets, spaced uniformly to form the bed. The sheets shall be assembled to a formed, nonperforated frame by welding. FE-4200 FE-4210 TECHNICAL REQUIREMENTS DESIGN CRITERIA The frame, or a nonperforated margin on the sheet, shall be of such width as to prevent bypass. Each bed shall have 1 in. (25.4 mm) minimum margins in order Design criteria for the following parameters shall be specified: (a) type astm download of gas to be treated (b) volumetric fiow rate (scfm) (c) design pressure (internal and external) to prevent wall effect in the gas fiow. Location and placement of spacers, stiffeners, and asme b31.3 supports shall be designed to ensure conformance to design requirements. (b) The smooth side of the perforated sheet shall be in contact with the adsorbent. ASME AG-1b-2011 ARTICLE FE-8000 QUALITY ASSURANCE FE-8100 GENERAL (a ) net bed area certification Quality assurance shall be in accordance with Article AA-8000 of this Code. The Manufacturer of this equip- ment shall develop and maintain a QA