Over 16,539,523 people are on fubar.
What are you waiting for?
sed for corrosion resistant overlay cladding. Where the Welding Procedure Specificatio or the welding material specificatio specifie percentage composition limits for analysis, it shall state that the specifie limits apply for the fille metal analysis, the undiluted weld deposit analysis, or in situ cladding deposit analysis in conformance with the above required certificatio testing. (c) The preparation of samples for chemical analysis of undiluted weld deposits shall comply with the method given in the applicable SFA Specification Where a weld deposit method is not asme bpvc section i provided by the SFA specification the sample shall be iso standards removed from a weld pad, groove, or other test weld5 made using the welding process that will be followed when the welding material or combination of welding materials being certifie is consumed.
The weld for A-No. 8 material to be used with the GMAW process shall be made using the shielding gas composition specifie in the WPSs that will be followed when the material is consumed. Where a chemical analysis is required for a welding material which does not have a mechanical proper- ties test requirement, a chemical analysis test coupon shall be prepared as required by WB-2431.1(c), except that heat 5 Corrosion Resisting Chromium and Chromium-Nickel Steel Welding Rods and Bare Electrodes, shall be used to establish a welding and sampling method for the pad, groove, or other test weld to ensure that the weld deposit being sampled will be substantially free of base metal dilution. Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Korea Power Engineering Co Inc ( KOPEC ) /3289500001 Not for Resale, 07/11/2010 18:41:14 MDT
